Smart Curtain Motor Manufacture introduces the installation steps of electric curtain track:

1. Positioning line

(1) The accuracy of line positioning is the key to the track of the window sill. The first is to measure the ratio of the fixed hole distance to the track of the equipment. The good ratio of the customer should be the total length of the track, and the total length of the track is the main gearbox, the track The sum of the length and the auxiliary gearbox,

(2) The curved track can form a zigzag curved curtain track according to the curvature of the building, the arc is not less than 120 degrees,

2. Lifting clip

(1) First, rotate the fixture 90 degrees to connect it with the track, and use self-tapping screws to install the lifting clip on the top plate. If it is a concrete structure, you need to add expansion wires, motor wires, motor and track connections,

(2) Put the electrical 90° into the main gear box, the flat rotating shaft of the main gear box should match the motor interface, and then rotate the motor 90 clockwise. After rotating it in place, push the blade into the gear box, and the direction will be actively locked. The motor will be connected to the gearbox,

3. Motor and track connection

Put the electric 90 degrees into the main gearbox, rotate the motor 90 degrees clockwise, after rotating, push the blade into the gearbox to the limit position, it will be actively locked, and the motor will be connected to the gearbox.

4. Motor program adjustment

(1) A set of gears and micro switch devices are installed at the end of the motor. The motor wiring must be positive and negative, and then open the window cloth to complete the self-positioning of the closing stroke.

(2) The installation procedure of the electric curtain track is complicated. If you can ask the owner to install it, it is best not to start it yourself, so as not to damage the window cloth motor and other accessories and cause unnecessary losses.

Through the above introduction, Motorized Shades Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.